Vector Ultra SPORT SPOT Instalační příručka

Preliminary Argus installation guide

2.3.1 Using the transparent pocket If the rig manufacturer hasn’t incorporated a clear window for the control unit, please use the transparent poc

2.4 Cable placement Ensure there are no kinks and coil as loosely as possible while still fitting the processing unit in the pocket. Coils must

3.0 Installation into common containers As a general rule, modern parachute containers come equipped with a setup for a modern AAD such as the Ar

3.1 One-pin containers with internally mounted reserve pilot chute 3.1 Rigging Innovations Inc. Rigging Innovations Inc. Po Box 86 Elo

Talon FS & Voodoo On the Talon FS and the Voodoo container, the cutter is mounted on flap # 1, directly over the reserve pilot chute. Thre

Talon FX On the Talon FX container, the cutter is mounted on flap # 1, directly over the reserve pilot chute. Thread the cutter cable through t

3.2 Aerodyne Research LLC Aerodyne Research LLC 12649 Race Track Road Tampa, Florida 33626 USA Phone +1 – 813-891-6300 Icon & Icon Student

3.3 Velocity Sports Velocity Sports Equipment 27611 146th Ave.E. Graham, WA 98338 USA Phone: +1 – 360-893-6111 Infinity On the Infinity

3.4 Parachutes de France Parachutes des France 2 rue Denis Papin Jouy-le-Moutier F-95031 Cergy Pontoise France Atom On the Atom cont

3.5 Mirage Systems Mirage Systems, Inc. 1501A Lexington Ave. Deland, Florida 32724 USA Phone +1 – 904-740-922 Mirage RTS / G3 / G4 On the

Index 1.0 The Argus 1.1 Installation in General 1.2 Technical Information 1.3 Jump Modes 2.0 Installation the Argus to your Container 2.1

Relative Workshop / United Parachute Technologies United Parachute Technologies (formerly Relative Workshop) 1645 Lexington Ave. Deland, FL 32724 U

Vector III / Micron On the Vector III/Micron container, the cutter is mounted on flap #1, directly over the

3.7 Paratec Paratec GmbH Flugplatz Saarlouis-Düren 66798 Wallerfangen Germnay Phone +49- 6837 – 7375 Ultra II & Next On the Ultr

Firebird / Performance Variable Firebird GmbH & Co KG (formerly PerformanceVariable) Am Tower 16 54634 Bitburg, Germany Phone +49-6561-949680

Omega Sport & Omega Tandem On the Firebird and the Performance Variable Omega Sport container and Omega Tandem, the cutter is mounted on

3.9 Sunrise Sunrise Manufacturing International Inc. 6520 Fort King Road Zephyrhills, FL 33542 USA Phone +1 – 813-780-7369 Wings

3.10 Basik Air Concept BasiK Air Concept 559 chemin des Salles – 83300 Draguignan France Phone: +33 - 494 99 12 36 Advanced “in” On t

3.11 Sun Path Sun Path Products 4439 Skydive Lane Zephyrhills, FL 33542 USA Phone +1 – 813-782-9242 Javelin / Javelin Odyssey On the Javel

3.12 Thomas Sport Equipment Thomas Sports Equipment Ltd Pinfold Lane Bridlington United Kingdom YO16 6XS Phone +44-1262-678299 1-Pin Tear Drop

3.13 Jump Shack Jump Shack 1665 N. Lexington Ave. #106 DeLand, FL 32724-2187 USA Phone +1 – 386 – 734-5867 Racer, Racer Elite On the Racer

4.3 Loop washer 4.4 Tools to use

4. Packing your reserve container with the Argus AAD Check the whole Argus installation for condition and serviceability at each rese

• Standard Loops for 1-pin and 2 Pin Container Standard loops have to be replaced with each repack. • Running Loops These loops must be repla

5. Maintenance of the Argus The maintenance work for Argus has to be done by Aviacom or another authorized service center. The follow

5.2 Water resistant filter replacement The design of the Argus allows water jumps without removal of the unit. It is water resista

5.3 Replacement of the Cutter Once Argus has fired, it is not necessary to return the Argus to Aviacom or another authorized servic

5.4 Software Update Software updates for the Argus have to be done only by Aviacom, or service centers specifically authorized by Av

6.3 Warranty period Within our warranty period of 2 years from date of manufacture, defective parts are replaced free of charge.

5. Maintenance for the Argus 5.1 Battery replacement 5.2 Water Resistant Filter replacement 5.3 Cutter Replacement 5.4 Software Update 6.

1.0 The Argus The Argus is a 3rd generation electronic and pyrotechnic safety device with superior electromagnetic interference shiel

The needle will shake and change to a higher (or a lower) altitude. A digital altimeter may indicate a 100 meter (300 ft) difference,

2. Installation of the Argus into your Container Disclaimer This manual contains information and instructions on installing Argus in various harn

To provide maximum protection for the processing unit (against physical damage and extremes in outside air temperature), the pock

2.2 Cutter-holder We recommend the use of a “heavy duty” single needle or a double-needle sewing machine to install the cutter